iFixit’s teardown of Apple HomeView, a smart-home display, reports that speaker-connector leads tore from their plastic housing during disassembly. The same teardown also broke a speaker and identified replaceable modules in the base; separating the display assembly is a much harder task. iFixit’s teardown details those findings.
NeoTeo previously covered HomeView owners’ setup and Siri problems; iFixit’s teardown examines the device’s hardware.
What happened to the speaker connectors?
During its teardown, iFixit reports, the leads on a speaker connector tore out of the plastic housing as the team tried to disconnect it. The team also could not remove a second brittle connector without damage. These are outcomes of that disassembly, not a prediction of what will happen in every repair.
Which HomeView parts are replaceable?
In the base version, iFixit identifies a modular, replaceable USB-C port and two replaceable passive speakers. It also describes a power-supply board that can be removed after releasing its screws and connectors. A short woofer cable makes access and reconnection more difficult.
Reaching those parts is not the same as separating the display from the base. iFixit says the interconnect cables pass through the pivot before its screws are installed. Separating the assemblies requires specialized tools or opening the screen side, which iFixit considers likely to be destructive.
Strong adhesive secures the display and speaker assemblies, among other parts. Removing the display required heat and sustained effort; inside, mixed Phillips and Torx fasteners add to the disassembly. The aluminum enclosure transfers heat from the logic-board shield, but the thermal bond makes board removal risky for the thin board.
A modular part and an accessible repair are not the same thing.
The two configurations also have different internal layouts. iFixit describes extra magnets, a larger and different logic board, and a center-exit USB-C port in the wall-mount version. The base version has larger speakers and a circular pivot mount.
What hardware did iFixit identify?
iFixit identified an A18 SoC and 8 GB of SK hynix LPDDR5X memory. It said the NAND appeared to be 64 GB of Kioxia flash.